How do I make scratches and scuff marks on my Trex fence less visible?

During shipping, installation, or even after the fence is up, scratches and scuff marks can appear any material, including Trex. These typically become much less visible after weathering (which typically takes a season of exposure to sunlight). However, to minimize the appearance of these scratches and scuff marks sooner, using Windex or WD-40 on the affected areas. This will darken the material and will lighten with the rest of the fence as it weathers. Spray a small amount of Windex or WD-40 on a rag and lightly rub into the affected area sufficiently to darken the material. Do not use too much of the spray or it will leave a noticeable spot on your fence until it weathers off.

Note: It is best to test these methods on a scrap piece or a small, less noticeable area of your fence first to make sure you get the desired results.